You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “The complete Super Robot Wars Z2 Saisei Hen pilot and unit hacking guide”.
You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “The complete Super Robot Wars Z2 Saisei Hen pilot and unit hacking guide”.
is it normal that when I swap one of my units wth an enemy mech like the reborns or the susanowo (along with swapping the pilots of the swapped units with the pilots of the new machines (in this example, ribbons and mr bushido) their theme is stuck as the daitarn 3’s theme and when I try to change their theme no matter which theme I select ,it remains set as the daitarn theme?
@bassgs435
Hmm, I’ve heard of this problem but never encountered it because I always used it with the MAP BGM for filming. Anyway, it seems there’s a BGM change code as well:
Changing BGM aircraft
_L 0x20001300 0x3C0108DE
_L 0x20001304 0x94216BD4
_L 0x20001308 0x38211000
_L 0x2000130C 0x14200006
_L 0x20001314 0x8E050000
_L 0x20001318 0x90A1003D
_L 0x20001320 0x8E050004
_L 0x20001324 0xA0A1001C
_L 0x20001328 0x0A21009A
_L 0x2000132C 0x00002821
_L 0x20040260 0x0A2004C0
_L 0xD0000000 0x10008010
_L 0x2000131C 0x00000000
_L 0xD0000000 0x10008080
_L 0x2000131C 0x200100mm
_L 0xD0000000 0x10008040
_L 0x2000131C 0x200100nn
_L 0xD0000000 0x10008020
_L 0x2000131C 0x200100pp
You replace mm, nn or pp with the code of the BGM you want (you can find the list here before I update this article:
http://charabox.2.pro.tok2.com/CoPaDS/PSP/ULJS-00460/cwc.html under BGMリスト ), then to use, you go the unit status screen as usual and press
[□ + ↑] button to ‘initialize BGM’
[□ + ←] button for mm BGM
[□ + ↓] button for nn BGM
[□ + →] button for pp BGM
Hope this helps
I’m really happy thankyou so much.
how can i change seishin list of aoi ? i don’t want change pilot but i want change seishin list so please help me
@Hieu
You can use the seishin change code by itself without the need to change units or pilots.
@YJ
i try this code
0x200010D0 0x2001000A
0x200010D4 0xA041005C
0x200010D8 0x20010009
0x200010DC 0xA041005F
0x200010E0 0x20010017
0x200010E4 0xA0410062
0x200010E8 0x20010002
0x200010EC 0xA0410065
0x200010F0 0x2001000B
0x200010F4 0xA0410068
0x200010F8 0x2001001C
with the Pilot Modification code. but when i go to the pilot status screen and push start + up , nothing happen . so what wrong here ?
@Hieu
Sorry, there was an error in the guide. It should be Start + Triangle. Let me know if this works.
@YJ
I try again with Start + up or start + triangle , but still nothing happen.
the pilot changed code and mech changed code work well . But seishin code didn’t work .
here the code i use
0x200E987C 0x1000002B
0x200E9880 0x8C550018
0x20001148 0x0A23A64B
0x2000114C 0x8C550018
0xD0000001 0x10001008
0x200E987C 0x0A20041C
0x200E9880 0x00000000
0x200010D0 0x2001000A
0x200010D4 0xA041005C
0x200010D8 0x20010009
0x200010DC 0xA041005F
0x200010E0 0x20010016
0x200010E4 0xA0410062
0x200010E8 0x20010002
0x200010EC 0xA0410065
0x200010F0 0x2001001C
0x200010F4 0xA0410068
@Hieu
Your codes look right. Which screen are you trying this on?
If I recall correctly, try the pilot status screen where you can view the list of seishin they have and try it there. Not this screen (http://images.saint-ism.com/lets_play_saisei_hen/stage_60/lets_play_saisei_hen_stage_60_70.jpg), but the next page.
Sorry if I can’t help, it’s been well over 6 months since I messed around with these codes.
@YJ
of course i go to the pilot status screen . anyway thank for your help . your walkthrought let’s play help me alot about the story of srw z2 .
sorry for my bad english .
And why is the level of all enemy pilots always 1 ? Eventhough their level increase in the scenario but in intermission their level go back to 1. Also, their PP (Pilot Pooint) have never increased and is always —-
Do you know any solutions for this ?
@Uta
They are level one because the player copy of the pilot is different to the enemy version. There are 2 solutions, first go to this link: http://charabox.2.pro.tok2.com/CoPaDS/PSP/ULJS-00460/cwc.html (put the whole thing in google translate)
1) Use the XP sub order code, then use sub order on your pilot.
2) Use the XP per kill code, kill an enemy using your pilot and they should gain alot of levels.
As for PP, there should be a PP code on that site as well.
hello , what is the xp sub or xp per kill for ?
Thanks for posting these. Embarssingly, I actually would like to use this so I can use Nena Trinity in the SRW game. I know she’s got serious problems, but I also look at her as ZEXIS’s scapegoat for all their problems, and the fact that they were alright with her dying makes me sick.
Banpresto hates Nena.
@John Barnes
Funnily enough, they included her unit just for her to appear and get destroyed in one mission :O
@YJ
Yeah, I looked at that as a waste. I know she’s a psychopath that, from a storyline perspective, was “unredeemable” and a “monster”, but she was my favorite character in the entire Gundam franchise and I look at her as a mentally disabled child in a woman’s body. Doesn’t make right what she did, but I will always say she deserved better than to be brutally murdered while nobody helped. Of course, nobody cares about what I say since I asked on GameFAQs (which I do regret, even though I hate her) if it was possible to kill Louise, even for a Game Over.
I justt want to ask, is there a pilot and unit hacking guide for hakai-hen?
@Build Strike
No guide, but a Japanese user has built a save-game editor which should do all of the above:
http://www.geocities.co.jp/Playtown-Queen/5355/save_tools/psp_srwz2h/srwz2h.html
How do you work this save-game editor? I can’t understand japanese 🙁
Oh and does it also work for windows 7? it says something about Windows 98/98SE/Me/2000/XP
@Build Strike
Sorry I haven’t tried it personally so I can’t help much. If it doesn’t work in Win7 you can always try running it in compatibility mode.
When I open the srwz2h_tool141 and I try to open the game save of hakai hen appears error and wont open the save for hack the units and pilots, any solution?
@YJ
I tried swapping out methuss early on, like stage 12, but when I do the game freezes. Is their something i’m doing wrong. is the methuss still important if it freezes, I have the use enemy code and unit swap code. Do need seishin for it to work.
@SevenSwords00
Where does the game freeze? When you start the next mission?
Just remember the earlier in the game you try this the higher chances of the game freezing. Usually I find it that pilot/unit has dialogue it will likely cause the game to crash.
@YJ
It freezes when I try to swap out the methuss by press start and up,left,down,right. When I do it without having a code for the unit I want it just gets rid of it.
@SevenSwords00
Sounds like you might have the code wrong.
Well I tried it with the code you put up. Do I put the unit code, say exia repair in the section were it says insert character code. Or is their something more to the code. O
@SevenSwords00
Yes you’re meant to put the code of the unit you want to swap with into the main code.
Have you tried switching another unit besides the Methuss? Also what about swapping with another different unit code?
Yes, I’ve tried it on force impulse gundam and the panthers from king gainer. I’ve tried other exchanging them for units like the undamaged exia, kyrios, nadleeh and destroy gundam, I also believe I’ve tried the vf-25 just in case it was freezing because the others I tried to were not normally obtainable. Like I said the swapping is working when I use a slot of the 4 codes that doesn’t have a unit code in it. It simply gets rid of the unit if there is no unit to replace it so I don’t think it’s because of the fact that the units I wanted swap out are relevant to the story. Do you think you could send me the codes for the for activation, us enemy units, pilot/unit swap codes and exia/ exia repair, kyrios and nadleeh, just in case I may be doing something wrong.
Also maybe instructions on how to swap them out just in case I’m doing something that causes it to crash.
聖王機 has no awaken code? :/
What are some units that are okay to replace and doesnt crash the game?
What are some mechs and pilots u can change and won’t crash ur game?
People who wants to have their enemy units fully leveled, here is the unlock code
_C0 Enemy/Sub Pilot Exp Restriction unlock
_L 0x2004ACA4 0x10000003
I got the codes to work, but for some reason even though I fully upgaded the hacked unit(Kokugoba), its damage is still at base.
i hope someone will be able to help, but whenever i try to swap out Crowe’s melee unit to a LiBrasta B (since i didnt like R), his unit disappears in the unit list, and cannot be selected for missions and whatnot, although it still shows crowe’s unit to be the LiBrasta B for the pilot list
any help?
@Leon Zero
Alot of weird things happen with this code. I’d try these:
– try the code on a different stage
– try switching another unit to the Librasta B. Then during a mission, try apply the code on Crowe’s unit (it should swap instantly to the B if it doesn’t freeze first)
If it doesn’t work your guess is as good as mine, sorry 🙁
I swap black getter to Shurouga. In the start of stage 45, when i sortie Shurouga, the game crashed. Any ideas ?
@Shu Shirakawa
Sometimes if a unit is needed in a stage the game will crash. Either don’t deploy it, or if the game keeps crashing switch back to Black Getter, finish the stage, then swap again.
i swap the not-used scopedog tc.iss to shurouga in stage 49 and it still crashed
@Kent
this doesnt work, my characters reverted back to Lv1 after one stage
How to use the code if there are variants like wing zero that can transform into flight mode ? everytime i change to wing zero it doesn’t appear when u try to upgrade, equip parts and when u want to deploy it.
@YJ How to use the code if there are variants like wing zero that can transform into flight mode ? everytime i change to wing zero it doesn’t appear when u try to upgrade, equip parts and when u want to deploy it.
@JHghgh
Hey sorry for late reply, but I unfortunately I never got the code to work well with transformer units, just like units with multiple pilots 🙁
@YJ
This works great, way late but is there any way to have certain pilots get voice clips? Nena for example doesn’t say anything, not even when she gets defeated like in plot.
Also, is it possible to give sub pilots? That might explain why Nena doesn’t talk.
Are there any codes that allow manipulation of Mech Stats like HP and EN? I wanna do an Uther playthrough with a not too OP Arclinus
If you visit http://charabox.2.pro.tok2.com/CoPaDS/PSP/ULJS-00460/cwc.html
There is a HP modification code but I’ve never tried it.
Thanks, I’m gonna work on an Insalaum Party.
any trick for upograde enemy unit ?